Home > Coatings
Choose a sub category:
Primers Basecoats
Additives Air Brush Paints
Clearcoats DIY Kits
Sort By:
Page of 1
Urethane Clearcoat - HI-SOLIDS Full Gloss

Features: 2-1 MIX RATIO ALMOST DOUBLE THE SPRAY ABLE PRODUCT COMPARED TO REGULAR GLOSS

Non Yellowing, Burnish Resistant
Excellent clarity and flexibility


This 2k Urethane Hi-Solids Gloss Clearcoat is typically used for expensive, custom paint jobs.  The Hi Solids formula means this clearcoat will go on much thicker than other clearcoats.  This will result in less coats needed to get extreme depth and clarity.  Only 2-3 coats of Hi-solids clear will resemble 8-10 coats of a regular clearcoat.
MyOHG Premium Epoxy Primer - Light Gray - 1 Gallon

This Premium Primer lays thicker and smoother, allowing you to hide texture.

This Epoxy primer can be applied directly to Metal, fiberglass, wood, and most plastics.  Using our basecoats, You can also basecoat right on top of this primer in as little as 15 minutes after you spray the Epoxy Primer.  Primer mixes with a 1:1 ratio with the supplied activator.  This means when you buy a gallon of this primer, you actually get a 2 gallons of spray-able material.
Urethane Clearcoat - Speed Clear coat - Full Gloss
Ready to sand or buff in just under 2 hours
MyOHG Urethane Clearcoat (Medium solids)- Full Gloss

Features:

Non Yellowing, Burnish Resistant
Excellent clarity and flexibility
Air Dry Time - 60-120 minutes
4:1 Mix ratio

This Medium Solids 2k Urethane Gloss Clearcoat is designed as a protective and decorative coating for the Automotive & Sporting industry.  It is formulated for good adhesion properties and exhibits good moisture resistance as well as chemical resistance.

(Medium solids = Faster build, thicker clearcoats & requires less coats than standard clears)
DTM Direct to Metal Primer (Not recommended on plastics)

Rust
Inhibitive Prime with acid etch
Dip on prime up to 15 days later
Ready to spray
No Activator required - Pour back into can to save for later
Recommended to bake under heat lamp for 15 min before sanding
DTM Direct to Metal Primer (Not recommended on plastics)

Rust
Inhibitive Prime with acid etch
Dip on prime up to 15 days later
Ready to spray
No Activator required - Pour back into can to save for later
Recommended to bake under heat lamp for 15 min before sanding
DTM Direct to Metal Primer (Not recommended on plastics)

Rust
Inhibitive Prime with acid etch
Dip on prime up to 15 days later
Ready to spray
No Activator required - Pour back into can to save for later
Recommended to bake under heat lamp for 15 min before sanding
DTM Direct to Metal Primer (Not recommended on plastics)

Rust
Inhibitive Prime with acid etch
Dip on prime up to 15 days later
Ready to spray
No Activator required - Pour back into can to save for later
Recommended to bake under heat lamp for 15 min before sanding
MyOHG Urethane Matting Base - Quart

Matting Base is a specially formulated product designed for the MyOHG range of products. This product mixed with MyOHG Urethane Clearcoats will produce a Flat, Satin, or Low Sheen look!  With this system you will not have any need to stock different clearcoats with different gloss levels.  Just add this product to MyOHG Urethane Gloss Clearcoat and you can achieve Flat/Matte, Satin & Low sheen finishes.  

For a Flat or Matte Finish use 60% by volume- Example- Add 6 ounces of matting base to 10 ounces of MyOHG Gloss Clearcoat and Hardener.

For a Satin Finish use 50% by volume- Example- Add 5 ounces of matting base to 10 ounces of MyOHG Gloss Clearcoat and Hardener.

For a Sheen Finish use 40% by volume- Example- Add 4 ounces of matting base to 10 ounces of MyOHG Gloss Clearcoat and Hardener.
Urethane Clearcoat - HI-SOLIDS Full Gloss

Features: 2-1 MIX RATIO ALMOST DOUBLE THE SPRAY ABLE PRODUCT COMPARED TO REGULAR GLOSS

Non Yellowing, Burnish Resistant
Excellent clarity and flexibility


This 2k Urethane Hi-Solids Gloss Clearcoat is typically used for expensive, custom paint jobs.  The Hi Solids formula means this clearcoat will go on much thicker than other clearcoats.  This will result in less coats needed to get extreme depth and clarity.  Only 2-3 coats of Hi-solids clear will resemble 8-10 coats of a regular clearcoat.
Urethane Clearcoat - Speed Clear coat - Full Gloss
Ready to sand or buff in just under 2 hours
MyOHG Premium Epoxy Primer - Light Gray - 1 Quart

This Premium Primer lays thicker and smoother, allowing you to hide texture.

This Epoxy primer can be applied directly to Metal, fiberglass, wood, and most plastics.  Using our basecoats, You can also basecoat right on top of this primer in as little as 15 minutes after you spray the Epoxy Primer.  Primer mixes with a 1:1 ratio with the supplied activator.  This means when you buy a gallon of this primer, you actually get a 2 gallons of spray-able material.
Aerosol Clearcoat - Gloss
Our Price: $20.00
MyOHG Urethane Clearcoat - Full Gloss

Features:

Non Yellowing, Burnish Resistant
Excellent clarity and flexibility
Air Dry Time - 60-120 minutes

This 2k Medium Solids Urethane Gloss Clearcoat is designed as a protective and decorative coating for the Automotive & Sporting goods industry.  It is formulated for good adhesion properties and exhibits good moisture resistance as well as chemical resistance.

(Medium solids = Faster build, thicker clearcoats & requires less coats than standard clears)
DTM Direct to Metal Primer (Not recommended on plastics)

Rust
Inhibitive Prime with acid etch
Dip on prime up to 15 days later
Ready to spray
No Activator required - Pour back into can to save for later
Recommended to bake under heat lamp for 15 min before sanding
Aerosol Clearcoat - Gloss
Ready to spray
Aerosol Primer
Our Price: $20.00
Aerosol Primer
Ready to spray
DTM Direct to Metal Primer (Not recommended on plastics)

Rust
Inhibitive Prime with acid etch
Dip on prime up to 15 days later
Ready to spray
No Activator required - Pour back into can to save for later
Recommended to bake under heat lamp for 15 min before sanding
DTM Direct to Metal Primer (Not recommended on plastics)

Rust
Inhibitive Prime with acid etch
Dip on prime up to 15 days later
Ready to spray
No Activator required - Pour back into can to save for later
Recommended to bake under heat lamp for 15 min before sanding
OHG Coupon Calendar
List Price: $19.99
Our Price: $6.99
Savings: $13.00
DTM Direct to Metal Primer (Not recommended on plastics)

Rust
Inhibitive Prime with acid etch
Dip on prime up to 15 days later
Ready to spray
No Activator required - Pour back into can to save for later
Recommended to bake under heat lamp for 15 min before sanding
DTM Direct to Metal Primer (Not recommended on plastics)

Rust
Inhibitive Prime with acid etch
Dip on prime up to 15 days later
Ready to spray
No Activator required
Recommended to bake under heat lamp for 15 min before sanding
OHG Coupon Calender - Value of over $2000 worth of coupons you can use throughout the entire year!

Get great deals, like buy one get one activators, Free Shipping on orders, discounts on everything including primers, clearcoats, basecoats, candys, air brush paints, films! Plus FREE PRODUCT with your orders!

Total of 48 coupons!